Set up your TP-Link Deco WiFi in 3G/4G or 4G/5G Router mode

Set up your TP-Link Deco WiFi in 3G/4G or 4G/5G Router mode

When working in 3G/4G or 4G/5G Router mode, Deco connects to the internet via a SIM card inserted.

1. Go to Google Play or the App Store to download the Deco app. Install the Deco app on your Android or iOS smartphone or tablet.

2. Open Deco app. Log in or sign up to set up a TP-Link ID.

Note: If you already have a TP-Link Cloud account, you can log in with your account.

3. Tap Let’s begin.

4. Select your Deco model.

5. Select Use as a 4G/5G Router.

6. Unpack the contents of the box. Once you verify you have everything, go to the next step.

7. Insert a SIM card to your Deco.

8. Place your Deco in an open area near a window and power outlet. Look for a location where it can receive a strong 5G signal.

9. Power on your Deco and wait until the LED pulses blue.

10. Connect your phone to the Deco’s default SSID printed on the bottom label (such as Deco_XXXX).

Note: Some phones may connect to the default SSID automatically. The Deco app will notify it found the Deco.

11. Assign your connected Deco to a room. The location will be also used as this Deco’s name.

12. Confirm or customize the SIM card information. If you are not sure, contact your ISP.

13. Create your Wi-Fi network name and password.

14. Connect your phone/tablet to the Deco’s Wi-Fi.

15. Setup complete. Now you can connect all your devices to the Deco network. If you have other Deco units in the same package, just plug in these Decos and they will be added to the network within 2 minutes.

https://www.tp-link.com/

Comments

Post a Comment

Popular posts from this blog

How to configure PPPoE on TP-LINK Deco E3

Image
How to configure PPPoE on TP-LINK Deco E3 Broadband internet subscriptions are available from most  ISPs around the world.  A technology some of them use to do it is PPPoE ( Point-to-Point Protocol over Ethernet ). The procedure for  configuring a PPPoE connection  at home may seem straightforward to you, but it is possible you are unfamiliar with PPPoE, so read those few steps and learn how to  set up PPPoE on TP-LINK Deco E3. How to configure PPPoE: The first thing you need to is to open TP-LINK Deco E3 admin page. Then find network settings. It could be called  Wan settings  or straightforward  PPPoE settings. Search for  PPPoE connection  details. Enter Username or ID or  Login, and Password  given to you by your Internet Service Provider. Nice! TP-LINK Deco E3 should now be connected to the internet. https://www.hardreset.info/
Read more

TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc)

Image
TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc) Before you start 1. To make sure the setup process can carry on smoothly, please disable the Power-Saving mode on the phone. 2. For iOS14 and above, enabling the Local Network is a MUST to complete the configuration process. The Deco can only be set up through the Deco app, which is available on Android and iOS. Here we take Deco X60 for example. 1. Go to Google Play or the App Store to download the Deco app. Install the Deco app on your Android or iOS smartphone or tablet. 2. Open the Deco app. Log in or sign up to set up a TP-Link ID. Note: If you already have a TP-Link Cloud account, you can log in with your account. 3. Tap  Let’s begin . 4. Select your Deco model. 5. Unpack the contents of the box. Once you verify you have everything, go to the next step. 6. Power off your modem and remove the backup battery if it has one. 7. Connect one of your Deco units to your modem via...
Read more