Port Forward for Xbox One on TP-LINK Deco E3

Port Forward for Xbox One on TP-LINK Deco E3

How to configure port forwarding for Xbox One on TP-LINK Deco E3. Port Forward all the necessarry ports on TP-LINK Deco E3 for Xbox One.

How to setup Xbox One port forwarding on TP-LINK Deco E3?

  1. At first, start your Xbox One.
  2. Then press on the Settings and from the list choose Network.  
  3. Select Advanced settings. 
  4. Note down the IP address, Subnet Mask and Gateway of your console. 
  5. Open TP-LINK Deco E3 admin panel, if you don't know how, check how to Open Admin Page TP-LINK Deco E3.
  6. Press on More Functions. 
  7. Pick Network Settings, select LAN and scroll down the page.   
  8. Click on Add key. 
  9. Enter the IP address and MAC address that you write down from Xbox One console.  
  10. Press the OK button.  
  11. Move back and again click on More Functions. 
  12. Now select Security Settings and then NAT Services.  
  13. Press on Add button.
  14. Enter the Service name, Device name and Host IP address.   
  15. From the Protocol list choose TCP/UDP.    
  16. Add to Internal port: 1935 and then enter External port: 1935 and press Save key. 
  17. Press on Add button once more.
  18. Enter the Service name, Device name and Host IP address.  
  19. From the Protocol list choose UDP.  
  20. Add to Internal port: 88 and then enter External port: 88. 
  21. Finally, press the Save button.
  22. Repeat steps 17, 18, 19, 20 and 21 for ports: 500, 3544, 4500.
  23. Perfect job! With all the ports properly forwarded you should have a better connection between Xbox One and TP-LINK Deco E3.

https://www.hardreset.info/

Comments

Post a Comment

Popular posts from this blog

How to configure PPPoE on TP-LINK Deco E3

Image
How to configure PPPoE on TP-LINK Deco E3 Broadband internet subscriptions are available from most  ISPs around the world.  A technology some of them use to do it is PPPoE ( Point-to-Point Protocol over Ethernet ). The procedure for  configuring a PPPoE connection  at home may seem straightforward to you, but it is possible you are unfamiliar with PPPoE, so read those few steps and learn how to  set up PPPoE on TP-LINK Deco E3. How to configure PPPoE: The first thing you need to is to open TP-LINK Deco E3 admin page. Then find network settings. It could be called  Wan settings  or straightforward  PPPoE settings. Search for  PPPoE connection  details. Enter Username or ID or  Login, and Password  given to you by your Internet Service Provider. Nice! TP-LINK Deco E3 should now be connected to the internet. https://www.hardreset.info/
Read more

TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc)

Image
TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc) Before you start 1. To make sure the setup process can carry on smoothly, please disable the Power-Saving mode on the phone. 2. For iOS14 and above, enabling the Local Network is a MUST to complete the configuration process. The Deco can only be set up through the Deco app, which is available on Android and iOS. Here we take Deco X60 for example. 1. Go to Google Play or the App Store to download the Deco app. Install the Deco app on your Android or iOS smartphone or tablet. 2. Open the Deco app. Log in or sign up to set up a TP-Link ID. Note: If you already have a TP-Link Cloud account, you can log in with your account. 3. Tap  Let’s begin . 4. Select your Deco model. 5. Unpack the contents of the box. Once you verify you have everything, go to the next step. 6. Power off your modem and remove the backup battery if it has one. 7. Connect one of your Deco units to your modem via...
Read more