Port Forward for PlayStation 4 on TP-LINK Deco E3

Port Forward for PlayStation 4 on TP-LINK Deco E3

How to configure port forwarding for PlayStation 4 on TP-LINK Deco E3. Port Forward all the necessarry ports on TP-LINK Deco E3 for PlayStation 4.

How to setup PlayStation 4 port forwarding on TP-LINK Deco E3?

  1. Open Settings on your PlayStation 4.
  2. Then open Network.
  3. Select View Connection.
  4. Write down DNS, Default Gateway, Subnet Mask, and MAC Address.
  5. Open TP-LINK Deco E3 control panel, if you don't know how, check how to setup TP-LINK Deco E3.
  6. Go to DHCP and Home.
  7. Enter Host name, IP address! IT MUST BE DIFFERENT THAN THE DHCP IP ADDRESSES RANGE! and MAC address that you found earlier in the PS4 settings.
  8. Click Apply to save all the settings.
  9. Go Back to PS4, and choose Settings, Network, and Setup Internet Connection.
  10. Then go to the Custom, and Manual Settings. 
  11. Enter IP address previously set as static IP for PS4, and default gateway, subnet mask, and DNS servers as it was before. 
  12. Go to TP-LINK Deco E3 settings and choose Advanced and Virtual Servers.
  13. Set all the settings as shown in the picture.
  14. If you don't have Both options, do it manually for TCP ports and UDP ports respectively.
  15. You need to port forward the following ports: 80, 443, 465,983, 1935, 3478-3480, 3658, 5223, 10070-10080.
  16. Fantastic! With all the ports properly forwarded you have a NAT Type 2 connection between PlayStation 4 and TP-LINK Deco E3.

https://www.hardreset.info/

Comments

Post a Comment

Popular posts from this blog

How to configure PPPoE on TP-LINK Deco E3

Image
How to configure PPPoE on TP-LINK Deco E3 Broadband internet subscriptions are available from most  ISPs around the world.  A technology some of them use to do it is PPPoE ( Point-to-Point Protocol over Ethernet ). The procedure for  configuring a PPPoE connection  at home may seem straightforward to you, but it is possible you are unfamiliar with PPPoE, so read those few steps and learn how to  set up PPPoE on TP-LINK Deco E3. How to configure PPPoE: The first thing you need to is to open TP-LINK Deco E3 admin page. Then find network settings. It could be called  Wan settings  or straightforward  PPPoE settings. Search for  PPPoE connection  details. Enter Username or ID or  Login, and Password  given to you by your Internet Service Provider. Nice! TP-LINK Deco E3 should now be connected to the internet. https://www.hardreset.info/
Read more

TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc)

Image
TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc) Before you start 1. To make sure the setup process can carry on smoothly, please disable the Power-Saving mode on the phone. 2. For iOS14 and above, enabling the Local Network is a MUST to complete the configuration process. The Deco can only be set up through the Deco app, which is available on Android and iOS. Here we take Deco X60 for example. 1. Go to Google Play or the App Store to download the Deco app. Install the Deco app on your Android or iOS smartphone or tablet. 2. Open the Deco app. Log in or sign up to set up a TP-Link ID. Note: If you already have a TP-Link Cloud account, you can log in with your account. 3. Tap  Let’s begin . 4. Select your Deco model. 5. Unpack the contents of the box. Once you verify you have everything, go to the next step. 6. Power off your modem and remove the backup battery if it has one. 7. Connect one of your Deco units to your modem via...
Read more