How to Setup Static IP for Xbox 360 on TP-LINK Deco E3

How to Setup Static IP for Xbox 360 on TP-LINK Deco E3

This guide will show you everything you have to do to set up a static IP address for your Xbox 360 using your TP-LINK Deco E3

How to set up static IP for Xbox 360 on TP-LINK Deco E3

  1. First, launch your Xbox 360 console.
  2. Now open Xbox Guide and move to the Settings card.
  3. Select System Settings part. 
  4. Pick Network Settings and choose the Wired Network section.
  5. Then from the list press on IP Settings and pick Configure Network.
  6. Click on Manual and next on IP Address.
  7. Now enter the IP address that you need and press the Done button.
  8. Go to the Subnet Mask, enter the address and again confirm by Done key.
  9. Choose Gateway card, write the Gateway address and click on the Done.
  10. Lastly, accept all changes by the Done.
  11. Well done! You set a static IP address for your Xbox 360.

https://www.hardreset.info/

Comments

Post a Comment

Popular posts from this blog

How to configure PPPoE on TP-LINK Deco E3

Image
How to configure PPPoE on TP-LINK Deco E3 Broadband internet subscriptions are available from most  ISPs around the world.  A technology some of them use to do it is PPPoE ( Point-to-Point Protocol over Ethernet ). The procedure for  configuring a PPPoE connection  at home may seem straightforward to you, but it is possible you are unfamiliar with PPPoE, so read those few steps and learn how to  set up PPPoE on TP-LINK Deco E3. How to configure PPPoE: The first thing you need to is to open TP-LINK Deco E3 admin page. Then find network settings. It could be called  Wan settings  or straightforward  PPPoE settings. Search for  PPPoE connection  details. Enter Username or ID or  Login, and Password  given to you by your Internet Service Provider. Nice! TP-LINK Deco E3 should now be connected to the internet. https://www.hardreset.info/
Read more

TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc)

Image
TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc) Before you start 1. To make sure the setup process can carry on smoothly, please disable the Power-Saving mode on the phone. 2. For iOS14 and above, enabling the Local Network is a MUST to complete the configuration process. The Deco can only be set up through the Deco app, which is available on Android and iOS. Here we take Deco X60 for example. 1. Go to Google Play or the App Store to download the Deco app. Install the Deco app on your Android or iOS smartphone or tablet. 2. Open the Deco app. Log in or sign up to set up a TP-Link ID. Note: If you already have a TP-Link Cloud account, you can log in with your account. 3. Tap  Let’s begin . 4. Select your Deco model. 5. Unpack the contents of the box. Once you verify you have everything, go to the next step. 6. Power off your modem and remove the backup battery if it has one. 7. Connect one of your Deco units to your modem via...
Read more