How to Connect TP-LINK Deco E3 to My Computer

How to Connect TP-LINK Deco E3 to My Computer

Nowadays, almost everything connects wirelessly -- even desktops come with Wi-Fi. Basically, just connect to the router's 2.4 GHz or 5 GHz band and you're good to go. Occasionally, you'll need a wired connection to test internet speed or to improve video quality. Let's show you how to tether your computer to your router. Let's also talk about why a wired connection is better for certain things.

How to setup wired router computer connection using TP-LINK Deco E3:

  1. The first thing you need to do is to plan your home network, specify the place where TP-LINK Deco E3 will be placed, and estimate the distance to your PC.
  2. Now you need to buy a long enough ethernet cable. We recommend you buy a category 6 ethernet cable or higher to achieve the best download speed.
  3. Connect RJ-45 Plug to the LAN Socket in TP-LINK Deco E3, ports are usually located at the back cover of the router, and to the ethernet slot in your PC or laptop.
  4. Now you need to configure two things on your PC.
  5. Be sure that you have a 1 Gbps connection.
  6. Set maximum MTU to 1500.
  7. Finally, you can check how fast is your internet connection on Wi-Fi and when you are using an ethernet cable connection.
  8. Fantastic! In my case switching to cable from Wi-Fi increased download speed ten times.

https://www.hardreset.info/

Comments

Post a Comment

Popular posts from this blog

How to configure PPPoE on TP-LINK Deco E3

Image
How to configure PPPoE on TP-LINK Deco E3 Broadband internet subscriptions are available from most  ISPs around the world.  A technology some of them use to do it is PPPoE ( Point-to-Point Protocol over Ethernet ). The procedure for  configuring a PPPoE connection  at home may seem straightforward to you, but it is possible you are unfamiliar with PPPoE, so read those few steps and learn how to  set up PPPoE on TP-LINK Deco E3. How to configure PPPoE: The first thing you need to is to open TP-LINK Deco E3 admin page. Then find network settings. It could be called  Wan settings  or straightforward  PPPoE settings. Search for  PPPoE connection  details. Enter Username or ID or  Login, and Password  given to you by your Internet Service Provider. Nice! TP-LINK Deco E3 should now be connected to the internet. https://www.hardreset.info/
Read more

TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc)

Image
TP-Link Deco WiFi Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc) Before you start 1. To make sure the setup process can carry on smoothly, please disable the Power-Saving mode on the phone. 2. For iOS14 and above, enabling the Local Network is a MUST to complete the configuration process. The Deco can only be set up through the Deco app, which is available on Android and iOS. Here we take Deco X60 for example. 1. Go to Google Play or the App Store to download the Deco app. Install the Deco app on your Android or iOS smartphone or tablet. 2. Open the Deco app. Log in or sign up to set up a TP-Link ID. Note: If you already have a TP-Link Cloud account, you can log in with your account. 3. Tap  Let’s begin . 4. Select your Deco model. 5. Unpack the contents of the box. Once you verify you have everything, go to the next step. 6. Power off your modem and remove the backup battery if it has one. 7. Connect one of your Deco units to your modem via...
Read more